Milo

This seatbox is entirely built from magnesium and anodised black aluminium for superior weather resistance and guaranteed against corrosion. The modular base, which can be adjusted in height independently of the frame for a more comfortable sitting posture, features a gel pole seat with a 2 cm-deep compartment underneath fitted with “Magus” polycarbonate pole winders, and one side and two front drawers, all 3.5 cm deep and made from ABS material. Under the base, integrated into the frame, is stowed a modular winder case with lid and handle holding a 2 cm-thick shelf which can be fitted with additional pole winders. The shelf slides on epoxy resin guides and can be slid out from either the front or rear side. The standard equipment includes: a non-slip sliding footplate, telescopic legs extending from 50 up to 80 cm complete with swivel feet, a box clamp support with a curved accessory arm, a box clamp support for keepnet, a side accessory tray with sliding connector for both horizontal and vertical adjustment and a super padded adjustable shoulder strap with two snap links for easy attachment and removal.


Dimensions:
Base: 42x32 cm.
Front drawers: 30x18.5 cm.
Side drawer: 40x27.5 cm.
Modular winder case: 42x32cm.
Side tray: 42x32cm.

The first of a family of three new mid range boxes the Tardis match modus has a gel seat, three drawer winder module with ABS lightweight drawers, completely adjustable in height. There is also space for 40 full length winders which fit below the seat and between the module and box frame. Below the module is our new slide out winder tray feature which gives you the option to add on extra trays of your choice depending on your needs. Complete with 20 winders a neat sliding footplate and side tray and Daytona pole rests, this box is very light and smart in black.

Top compartment 42 x 32 x 2 cm........Side tray 39 x 30 x 1,5 cm
Front drawers (2) 18,5 x 30 x 3,5 cm....Storage box 42 x 32 x 2 cm
Side drawer (1) 40 x 27,3 x 3,5 cm.......Sliding footplate 44 x 34,5 cm

Designed for the angler who needs plenty of drawer space and maximum flexibility. The Tardis Match Plus has a 5 drawer, height adjustable, module. Complete with 2 front drawers and three side drawers, all aluminium. With extra space below the gel seat and between the module and frame of the box, this top part of the box offers space for 100 full length winders without using the front drawers, which are ideal for storing line, shot, hook boxes and all your bits and pieces. Below this module is the slide out part of the box that has a 2cm deep winder tray plus an 8cm deep unit complete lid for reels etc. This unit can be removed and left at home or other trays can be added in its place if more winder space is needed. Complete with gel seat, 20 winders, side tray, Daytona pole rests and sliding footplate the Tardis Match Plus is a very adaptable piece of kit.

Top compartment 42 x 32 x 2 cm............Side tray 39 x 30 x 1,5 cm
Front drawers (2) 18,5 x 30 x 3,5 cm .......Storage box 42 x 32
Side drawers (3) 40 x 27,5 x 2 cm ...........Top storage box compartment 42 x 32 x 8 cm
Bottom compartment 42 x 32 x 2 cm........ Bottom storage box compartment 42 x 32 x 2 cm
Sliding footplate 44 x 34,5 cm

This box is a development from the popular M1100 box. This new version is considerably lighter and the sliding footplate makes the box more compact whilst not reducing the dimension or capacity of the main drawer module. Fully adjustable in height up to 100 winders can be stored in it without using the front drawers or base unit. Topped off with a gel seat and side tray and Daytona pole rests its a great looking box and very stable when set up.


Top compartment 42 x 32 x 2 cm............. Bottom compartment 42 x 32 x 9 cm
Front drawers (2) 18,5 x 30 x 2 cm ............Side tray 39 x 30 x 1,5 cm
Front drawers (2) 18,5 x 30 x 3,5 cm......... Sliding footplate 44 x 34,5 cm
Side drawers (4) 40 x 27,5 x 2 cm

Massive and luxurious, the Scuderia 1800 from Milo is designed to be the ultimate in competition seatboxes for 2008!
Entirely constructed from the new, Italian-made 6015 aluminium for superior weather resistance, this seatbox is packed with a host of features for unequalled performance. The modular base, which can be independently adjusted in height along the frame, comprises a gel pole cushion covered with carbon fabric, a 8cm-deep compartment under the seat, two plain drawers measuring 2 cm in depth and two perforated drawers measuring 3.5 cm in depth, all in the front. Under the base, integrated into the seatbox frame, is stowed a stylish modular winder case with lid and handle featuring three 2 cm-thick shelves, two of which are perforated for added lightness. The case, which comes fitted with 20 narrow and 14 wide polycarbonate winders, slides on epoxy resin guides and can be extracted from either the front or rear side. The seatbox comes with new, anatomically-designed knobs for a sure and comfortable grip and a spirit level for a secure and balanced set-up. The telescopic round-section legs are screen printed and feature an aluminium core and a carbon resin finish. They extend up to 1 mt and are fitted with swivelling and floating “spider” feet made from Hostafon, a material with a mechanical strength superior to that of aluminium. The seatbox comes as standard with the following options: a side tray, a table with a square bowl, a folding spray-bar support with pole-releaser, a Daytona pole roller rest, an umbrella support, a multifunction arm with two connectors and threaded sticks, a non-slip sliding footplate and a super padded shoulder strap for comfortable transport.

Modular base 42 x 32 cm ....................................Side tray 49,3 x 31 x 2 cm
Front perforated drawers (2) 36 x 22,4 x 3,5 cm ...Case 42 x 32 cm
Front drawers (2) 36 x 22,4 x 2 cm .......................Sliding footplate 50 x 35 cm
Table with bowl 57,5 x 40 x 2 cm
Bowl 40 x 30 x 10 cm

Entirely constructed from the unique, Italian-made 6015 aluminium for superior weather resistance, this top-of-the-range competition seatbox has a simple but attractive cosmetics and is packed with a host of features similar to those of the Scuderia model. The modular base, which can be independently adjusted in height along the frame, features a gel pole cushion covered with carbon fabric, a 8 cm-deep compartment under the seat and three front drawers. Two of the drawers measure 2.5 cm in depth and are perforated and fitted with 17 narrow and 12 wide polycarbonate winders, while the third one is 5.5 cm deep. Under the base, integrated into the seatbox frame, is located a stylish modular winder case with lid and handle. The case is equipped with three shelves, two of which are 2 cm thick and one is 4 cm thick. The case, which comes fitted with 25 narrow and 17 wide polycarbonate winders, slides on epoxy resin guides and can be extracted from either the front or rear side. The seatbox comes with new, anatomically-designed knobs for a sure and comfortable grip and a spirit level for a secure and balanced set-up. The square-section legs are all telescopic and extend up to 87 cm . They are fitted with swivelling and floating “spider” feet made from Hostafon, a material with a mechanical strength superior to that of aluminium. The seatbox comes as standard with the following options: two side trays with connectors allowing for both horizontal and vertical adjustments, a folding spray-bar support with pole-releaser, a Daytona pole roller rest, an umbrella support, a box clamp connector with a threaded curved arm, a threaded box clamp connector for keepnet, a non-slip sliding footplate and a super padded shoulder strap for comfortable transport.

Modular base 42 x 32 cm ............................................Side trays (2) 49 x 38 x 2 cm
Front perforated drawers (2) 35,5 x 27,5 x 2,5 cm ........Case 49,5 x 32 cm
Front drawers (1) 35,5 x 17,4 x 5,5 cm .........................Sliding footplate 50 x 35 cm