Gardner

Aesthetically designed to complement the Black Shadow Standard Pod and Black Shadow Banksticks. Buzzer bar extensions are 'D' section to avoid twist. Thumbscrews are nylon tipped to minimise damage to paint finish. Sold in pairs, rear bar 10" extending to 16" & front bar 12" extending to 18".

Feature a black finish and easy to use pozi-grip trilobe thumbscrews on adjustable models.

Aesthetically designed to complement the Panther Pod & Panther Banksticks. Buzzer bar extensions are 'D' section to avoid twist. Thumbscrews are nylon tipped to minimise damage to paint finish. Sold in pairs, rear bar 10" extending to 16" & front bar 12" extending to 18".

Have the unique non-twist Tru-Lok extending system & an aesthetically designed all black finish. Buzzer mountings have the new Kwik-Lok system, so buzzers can be attached and aligned in seconds. Sold in pairs, rear bar 10" extending to 16" and front bar 12" extending to 18". To complement Tru-Lok banksticks & Black Shadow Tru-Lok Pod.

Slim style with machined point and double nylon tipped thumbscrews & T bar for added tightening. Aesthetically designed to complement the Black Shadow buzzer bars.

The very first solid pointed bankstick.

Original Gardner design - copied by many but never bettered.
Strong yet lightweight Aluminium tube and solid sliding inner tube.
Solid Aluminium point copes with the hardest ground.
Brass collar and top resists wear and tear better.

Posi-grip Trilobe thumbscrew for easy use.
Black powder coated finish.

Manufactured in the UK - Beware of inferior imitations.
Superb value for money.
Available in 12", 20" and 30".

A great idea; place it into the top of your banksticks so you can hit them with no damage.

Fully extending chunky style "Euro" style banksticks with T bar and double nylon tipped brass thumbscrews. Aesthetically designed to complement the Panther buzzer bars.

A pair of 6" (15cm) Matt Olive Green extending banksticks designed specifically for the stalker on the move.

Strong yet lightweight high tensile Aluminium construction.
Sticks can be used individually for a low rod set-up.

The points can be unscrewed enabling the Stalking Sticks to be screwed together to form a single 12" extending bankstick.
Oversized nylon tipped Brass thumbscrews prevent damage when fastening.
Handy and compact - fit easily into pockets - perfect for the mobile approach.

Luxury Camo Green powder coated finish.
Manufactured in the UK - Beware of inferior imitations.

Extremely tough long bankstick - can be used to support an umbrella or with a Skyliner Rod Rest for the Beachcaster method. Very robust and stable even when fully extended.

High tensile Aluminium tube with a 22mm outer and 16mm inner.
Solid, long Brass collar guarantees stability when extended.
Double nylon tipped Brass thumbscrews prevent damage when fastening.
Swaged lightweight Aluminium point.

Tough All Black powder coated finish.
Manufactured in the UK - Beware of inferior imitations.
Available in 21", 36" and 48".

These fully extending Aluminium banksticks have been designed for use in conjunction with the Tru-Lok range allowing the quick attachment and release of Tru-Lok Buzzer Bars or Tru-Lok Gripper Heads.

Unique Kwik-Lok system enables bars and heads to be attached and aligned in seconds with no fear of working loose. Simply turn the thumbwheel to draw and lock bars into banksticks or buzzers/heads into buzzer bars. Everything tightens up in precise alignment.
Sliding Non-Twist inner section is D shaped to prevent twisting.
Solid Brass point stands up to the hardest ground with maximum resistance to damage and scratching.
Tough Black powder coated finish on inner and outer to prevent corrosion.

Textured sparked finish on top and collar.

Manufactured in the UK - Beware of inferior imitations.
Available in 12", 20" and 30".

Supreme quality, chunky banksticks with a multitude of uses from big water goalposts, bivvy sticks or as a weigh station - Twistiks will cope with it all. Spiral threaded point fully machined from a solid brass point. Twin Brass thumbscrews have nylon tips for security and feel and enable the Twistiks to be extended to nearly twice their length with full rigidity. Comes with a Stainless Steel T-Bar for screwing into gravel, hard ground, or wooden platforms. Available in 2ft, 3ft and 4ft. Colour: Dark Green finish.

The original screw-in Brolly Pole was the first on the market and has not been bettered since. Individually machined from a length of Solid Aluminium these poles will literally last a lifetime. Lightweight high tensile Aluminium with machine threaded tip is as tough as they come. Steel T-Bar for winding into really hard banks. Manufactured in the UK - Beware of inferior imitations. Available in 29" (73cm), 36" (91cm) and 48" (120cm).

Adjustable solid brass caps for use with storm sticks and umbrellas. Full 180-degree adjustment arc. Supplied with Allen key for positive tightening.
Qty 2

We designed this tripod adaptor primarily as a rock solid weigh station but with an extra stud in the rear for increased versatility. OR, with a long bankstick on this rear stud and long extending front legs you can create a high rod position to keep lines out of the water at range or with the beachcaster floater rig. OR, use a short bankstick on the rear stud and a couple of Stalking Sticks and you have a stalker pod for free! OR, it also makes a rock solid extending camera tripod. Machined from a solid block of Aluminium and fitted with Brass studs and buzzer bar fitting. Black powder coated finish for longevity. Comes complete with a Stainless Steel bait/scales support hook. Made in England.

Designed primarily as a rear head, but with a small line groove to enable it to be used at the front as well. The silicone rubber mix ensures that these heads are practically unbreakable in normal use. The Solid Brass stud allows the head to be twisted to align with buzzer bars.

Top Tip - Try immersing a Flexible Rubber Head in a cup of boiling water for a minute or two - Be careful! It is easier to leave it attached to the Rod Rest. When hot, the Head can be moulded to the exact width of your rod butt (or an alternative shape). To set the new shape, hold the Head under cold running water for 10 seconds or until the temperature has cooled down to normal

Used primarily as a Snag Rest for fishing 'locked up' at a tight angle, the G-Force Head also keeps rod butts from lifting during fast takes and makes an ideal rear rest for big Barbel fishing.

Made from Silicone treated Rubber for a balance of grip, strength and softness. It is designed to flex without breaking and grip without sticking.
Unique extra long Brass stud and thread allows Head to be positioned in either direction without needing to be loosened.
Designed in conjunction with top Carpers Andy Thomas and Dave Benton.
Fits any Banksticks, etc.

Top Tip - Use the G-Force Head with short, strong banksticks like the Stalking Sticks. Stay alert and on the rods at all times. Please consider fish welfare when Snag Fishing.

Holds rods steady during high winds or fast takes.

Fits any bankstick or buzzer bar except the Tru-Lok.
Rubber/Silicone mix for optimum grip with the best amount of flex. Practically unbreakable in normal use.

Shaped to grip all rod butts.
Solid Brass stud allows the head to be twisted to align with buzzer bars.
Manufactured in the UK - Beware of inferior imitations

Non-twist rear heads to fit Tru-Lok buzzer bars and banksticks. Made from flexible silicone rubber it is ideal for gripping the rod butt during high winds etc.

These entry level Front and Rear Heads are excellent value for money.

The Front Head (top picture) features a wide groove for easy line flow and good bite detection when legering. It is also suitable for float fishing.

The Read Head (bottom picture) offers a wide cup for convenient location with a smaller cup for the rod butt to rest in.
Both are designed to hold rods stable in high winds.
Black nylon with solid thread.

These entry level Front and Rear Heads are excellent value for money.

The Front Head (top picture) features a wide groove for easy line flow and good bite detection when legering. It is also suitable for float fishing.

The Read Head (bottom picture) offers a wide cup for convenient location with a smaller cup for the rod butt to rest in.
Both are designed to hold rods stable in high winds.
Black nylon with solid thread.

Purpose designed rod butt support for keeping line off the surface when fishing long range and the beachcaster floater fishing method.

Lightweight Aluminium.
Specially designed cup and V rest to hold the rod butt securely.

Very stable, especially when fished off a Twistik screwed into the ground.
Standard thread fits any bankstick.

For improved "locking" between buzzer bars and banksticks. Suitable for all bars except Tru-Lok.

As originally developed by Gardner's very own Lewis Read, the Weed Rake was born on the Car Park Lake at Yateley. Designed to be easily cast to clear small clear spots of weed and create clear channels to improve line lay to new and existing clear spots, the Weed Rake is invaluable and has lead to the capture of some of the largest Carp in the country.

All metal Brass and Steel construction will never break.
Only 3 ounces (85g), it is a very comfortable weight to cast.
Supplied with a large split ring and swivel for attachment to main line.
Green Anti Rust coating.
Width = 15cm (6"), Body Length = 4cm (1.5").

Top Tip - We recommend that you use a strong braid such as 50lb Sufix Performance Braid and begin clearing the channel to your chosen spot from the end nearest to your swim first. The weed rake picks up very large quantities of weed if cast behind a band of weed so be careful not to lose the rake and braid by being 'over ambitious' in trying to rake in too much heavy weed in one go.

Will fit all alarms and buzz bars. Used to separate swing arm indicators from buzzer heads in order that the on/off switch and jack plugs can be operated. Can be used as rod height spacers. Sold in pairs.

Slim, strong banksticks made from 100% stainless steel, featuring double thumbscrews for maximum stability. Designed to complement the Stake-Out and Slimline buzzer bars.

Developed and designed for use in swims where the ground is extremely hard, which is no problem for the fully machined spiral point to screw into. Twin thumbscrews are fitted for extra grip when tightening, a stainless steel Tommy bar is supplied.

To be used with the Skyliner rod rest head, for beach caster fishing.

This will eliminate the twisting in banksticks while in the ground.

An extendable all black multi-positional leg pod, ideal for rods or as a camera tripod.

Designed to hold rods stable in high winds.