Gardner Tackle

The ATTs Alarm will be the first silent - yes, silent! - buzzer .

Only compatible with the new V2 ATTx Receiver (available separately for R.R.P. £99.99), the ATTs Alarm will be the smallest buzzer on the market by a considerable way and yet still manages to have the transmitters built in.


100% Waterproof - as tested by scuba divers!
Brass Bolt & Locking Nut
Comes with Protective 'Hard Case' Cover
Simple to use (no buttons, switches or knobs)
Low Battery Warning (alerts you on the receiver)
Sound where you want it - in your bivvy or your pocket and not at the water's edge.

Available with a choice of 7 colours of LED (Red, White, Blue, Green, Orange,Yellow and Purple).

RRP £75.99

Designed specifically for the ATTs Alarms, these tiny betalights are available to match the colours of the LEDs. Now sold in Pairs.


Tritium-MAX betalights are the ultimate continuous light source. Gaseous Tritium technology provides the maximum possible brightness making these the most powerful isotopes available. Tritium-MAX are also the first betalights (for fishing use) to be made in True Purple colour.

Designed for use with ATTs alarms
No maintenance or batteries required
User and environmentally friendly
2 Betalights per pack.
Size: 6mm x 2mm (Round cross section)
Colours: Green, Red, Ice Blue, Purple, White & Orange
Also available - Large (22.5mm x 3mm), Small (12mm x 2mm) and Bug (10mm x 2.5mm)

Increase the sensitivity of your ATTs Alarm with these interchangeable Magnet Roller Wheels, colour matched to all the LED colours. 1 Wheel per pack.


With the 2 Magnet Wheel the Receiver beeps once per 1 cm of line movement. With the 4 Magnet Wheel the Receiver beeps once per 0.5cm of line movement. The ATTs is supplied with a Black 2 Magnet Wheel as standard.

Changing the Magnet Wheels couldn't be easier. Simply unscrew the current Wheel and screw-in a new one, as shown.

V2 Features

New Rubberised Finish
Both the receiver and alarms now come in a soft touch non-reflective rubberised finish.

Improved Battery Life on Receiver.
The V2 receiver is powered from a single 1.5 volt type “AA” battery (V1 uses 3 AAA batteries ), providing a battery life of up 3 weeks of normal use for 25p.

Mimics Alarm BeepsThe V2 receiver will beep at the same rate at which signals are received by the transmitters (from the buzzer output), thereby sounding anything from a single bleep to a full-blown 'one-toner'.

Low Battery Warning
The receiver now has a low battery warning feature.

Improved Range and Performance
Under optimum bankside conditions, the new system has been tested up to 500m. This guarantees good signal range in the worst swims.

Multiple Tone Selection on the Receiver
V2 receiver comes with 10 different user selectable tones.

Activation on all LEDs
If you receive 2 or more simultaneous runs, the corresponding LEDs will be light up simultaneously.

Full ATT WarrantyThe system is covered by a full ATT 2 year warranty.

Improved Transmitter Design
The transmitter has been re-designed to offer a smaller battery recess cover. The electronic circuitry is encased in it's own watertight compartment to prevent the risk of water ingress, transmitter corrosion and any resultant malfunction.

Compatibility with new productsThe V2 system was built to be compatible with new ATT products currently under development. This may well include other manufacturers products. Increased LED 'light Up' timeLEDs will remain on for 30 seconds after the last buzzer signal is received from the transmitter. Last LED Activation RecallIndicates the last LED that was lit up.

Our Price: £94.99

The eagerly awaited Version 2 ATTx Remote System allows anglers to receive remote indication of almost any buzzer on the market! The new system not only refines and improves on the original but also includes a few new features:
New Soft Touch, non-reflective, rubberised finish on Receiver and Transmitters.
Improved Battery Life on Receiver and Transmitter - The Receiver is powered by a single AA Battery providing a battery life of up 3 weeks of normal use. The Transmitter is powered from a single GP11A battery lasting up to 1 season of normal use. Batteries are not included and are sold separately.

Low Battery Warning (very useful).
Mimics Alarm Beeps - The Receiver beeps at the same rate at which signals are received by the Transmitters, from the buzzer output, thereby sounding anything from a single bleep to a full-blown 'one-toner'.
Improved Range and Performance - tested up to 500m under optimum bankside conditions.

Multiple Tone Selection on the Receiver - 10 different user selectable tones.
Improved Transmitter Design - Re-designed to offer a smaller
battery recess cover. The electronic circuitry is encased in it's own watertight compartment to prevent the risk of water coming in, transmitter corrosion and any resultant malfunction.
Activation on all LEDs (for simultaneous runs).
Last LED Activation Recall.
Increased LED 'light Up' time - LED's will remain on for 40 seconds after the last buzzer signal is received from the transmitter.
Vibrate mode and Volume control.
Full 2 year ATT Warranty - please see the ATT website for full details.
Full Compatibility with new ATT products currently under development.
Available with 2.5mm or 3.5mm Jack Plugs.
Standard system comes with 5 different coloured LED's - Red, White, Blue, Green and Orange. An 'All Blue LED' system is also available at the same price.

To complement the Car Security Pager unit, ATT have developed a Mini Receiver. An excellent way to protect your car and its contents, the Mini Receiver is compact enough for use in any situation, whether fishing on the bank or in non-fishing situations. Please note - the Mini Receiver is not a part of the ATTx V2 system (it is only compatible with the Car Pager System).

Pocket Sized with Keyring attachment.
Visual, Audible and Vibration Warnings.
Full instructions supplied.

Uses 1 x AAA Battery (not supplied).
Full 2 year ATT Warranty.

Anti-Theft device for use with the ATTx V2 Receiver and ATT Mini Receiver. Simply wire the Car Pager either into your car alarm or directly into the car's ignition circuitry or alternatively it may be used with the ATT Ultrasonic Sensors.

Simple to install and use.
No batteries required.

Full instructions included.
Full 2 year ATT Warranty. Please see the ATT website for full details.

Car Pager Operation:

The unit is activated when your car door is opened. Once triggered the pager unit will transmit signals to the ATTx V2 Receiver which sends the receiver into 'Alarm Mode'. The unit will transmit the signals three times, then pause for an hour, then re-transmit the signals again after an hour. This process is repeated until the pager unit is reset. Turning on the vehicle ignition will reset the pager unit.

If the optional Ultrasonic Sensors are fitted, the pager will also be triggered if your vehicle window is smashed.

Super sensitive car intruder detectors, the Ultrasonic Sensors will be triggered if your car window is smashed, sending a signal - via the Car Pager - to the ATTx V2 Receiver or ATT Mini Receiver. Available in 2 variations:

Dashboard Mounted Sensors (top picture)
Pillar Mounted (Hidden) Sensors (bottom picture).

Simple to install and use.
No batteries required.
Full instructions included.
Full 2 year ATT Warranty.

Quality leather pouch for the ATTx Receiver.

Hard wearing, durable leather construction, felt lined on the inside.

See through window for LED visibility.
Velcro belt attachment.
Clip attachment to allow hanging.
Suitable for both V1 and V2 ATTx systems.

In a world where most alarms look pretty similar but vary tremendously in performance, we decided to offer the TLB as a hand made (in England), all round buzzer with the emphasis on Quality, Reliability and Simplicity...with a touch of individuality! This compact little buzzer is as tough as old boots and we are constantly astonished by how rugged, durable and waterproof it is. You tend to get what you pay for in life and buzzers are no exception - we regularly hear from customers who have used TLB's for over 10 years and never had a single problem.

New Matt Black finish - now available.

In a world where most alarms look pretty similar but vary tremendously in performance, we decided to offer the TLB as a hand made (in England), all round buzzer with the emphasis on Quality, Reliability and Simplicity...with a touch of individuality! This compact little buzzer is as tough as old boots and we are constantly astonished by how rugged, durable and waterproof it is. You tend to get what you pay for in life and buzzers are no exception - we regularly hear from customers who have used TLB's for over 10 years and never had a single problem.