Fox

Designed to be used with a 3oz lead or heavier
• Optional stiff anti-tangle tubing.
• For fishing over weed use a boom section between the Slik® ring and lead.

Available in 2 options:
1. Zig Float including Slik Ring Boom
2. Zig Float, Stiff And Tangle Tube

Don’t be fooled by first impressions, as this IS NOT PVA! It’s a new baiting system that utilises a mesh that doesn’t breakdown in water.

It was originally developed to prevent crayfish or other small ‘nuisance’ fish attacking your hookbait, but in fact offers a huge list of additional benefits that will appeal to all types of anglers: carp, match, predator and even sea anglers!

The mesh creates an almost invisible cage around your bait which stops small fish eating it, while still allowing the flavours to leak out into the water. It also means you can use baits on the hook that have previously been impossible including:


Spod mix

Mashed meat

Pellet ball

Paste

Liquidised bread

Sweetcorn ball

Chopped worms/maggots

Mashed fish for predators/sea species

It also allows you to fish pellets for long periods, without risk of breakdown, and it’s very effective when used with corn in the mesh and a piece of plastic corn as a hair-stop. We’ve even had our consultants use a mesh bag of hemp fished over hemp loosefeed with devastating results!

You load the Arma Mesh exactly as you would load PVA, using the loading funnel supplied. It comes in narrow (14mm) and wide (22mm) sizes, and refill spools are available.

To use the Mesh we recommend you use a traditional hair rig approach. You can pass a baiting needle through the sack of bait and then slide it up a hair, securing it with a hair stop.

Ergonomically designed to fit comfortably in the hand.

‘Soft Touch’ rubber moulded handle.

Stainless steel hook.

This special high performance micro-fibre towel is antibacterial and up to three times more absorbent than standard towelling fabrics. This makes it ideal for general angling use including cleaning and drying equipment. The Micro-Dry fabric is extremely fast drying and the anti-bacterial action prevents odour retention caused by active bacteria. The material is exceptionally durable and will not bobble or fade even after high numbers of machine washes.



Quick Drying

Odour fee

Anti-bacterial

Super absorbent

Soft, light and extremely durable

Complete with zip bag

800mm x 400mm


The Micro-Dry hand towel is made from a Ultra fine Microfiber, which is 100 times finer than the human hair. Manufactured with Ultra High Density contraction, it doesn’t retain water, sweat and residual fat on the skin. Its triangular section thread absorbs anything in itself efficiently and the cleansing efficiency is second to none. Below are a few examples of how the Ultra - Microfiber material compares to other materials.

Interchangeable line clips fitted with 'Ball' clip which can be attached to rod between reel and butt ring to alter the angle of the line for bite indicator. Alternatively, switch to the 'Blade' if you require a line clip for tight line 'Clipping Up'.

Available in 10mm,12mm & 14mm.

Fox Braid Blades are made from hardened Stainless Steel with precision ground edges designed to cleanly cut modern braided and coated lines. Many of these materials are constructed from Dyneema – one of the strongest and toughest known fibres and this can make them extremely difficult to cut cleanly and neatly when constructing rigs.

Braid Blades are designed specifically for dealing with such materials and are suitable for either left or right handed use.

The Diamond Hook sharpener is designed to hone hooks to a perfect needle point. Suitable for all hook patterns and sizes, the file allows the angler to touch up single or treble hooks that have been blunted during the capture of a fish or in general use. The file is set into a durable, easy grip rubberised handle and allows the angler to keep all hooks razor sharp.

Splicing Needles are designed specifically to neatly splice loops or join monofilament lines to Fox Leadcore. The micro engineered hinged lip has a closing gate which captures the fibres and prevents snagging. The shaft is low diameter stainless steel which also makes them for hair rigging very small or soft baits without splitting them.

The Stix baiting needle has been designed to make easy threading of PVA sticks directly onto the hooklink. It is also invaluable as a stringer needle and features a 135mm steel shaft with a hinged gate closure. This allows the hooklink loop to be pulled through the PVA stick without tearing or laddering the PVA mesh. The needle is set into an ergonomic, soft touch handle to make a durable and versatile baiting tool.

The Pellet Drill is designed for drilling pellets as small as 4mm without splitting them.

Use in conjunction with our Paste Stop Needle, with it’s fine stem to thread the drilled pellets onto a hair.

The Fox 1.5mm Nut Drill is an extremely useful tool which will allow all manner of hard baits to be mounted onto a hair rig style presentation.

Perfect for drilling fine holes through the centre of any hard bait from trout pellets through to nuts, air dried boilies and floating pellets. This removes the need to use a needle which can be dangerous.

The corrosion resistant stainless steel needle is insert moulded to a dual material ergonomically designed handle with a soft touch rubber grip.

The Hair Widget has been designed to attach a fine, soft hair to the hook shank and allow thick or heavy hooklinks to be tied knotless knot style without affecting bait movement and presentation.

The Hair Widget also allows the hair to be positioned at any point along the hook shank. Generally fixing the hair close to the bend will give the best performance and when a fish is hooked the stop will slide back to give good hook penetration.

Purpose designed for fishing hair rigged meat and will provide greater security than a standard boilie stop. The unique shape of the Meat Stop spreads the load away from the hair loop for better support

Boilie Props are a low prfile bait stop that features a unique curved underside which hugs the hook bait, following its contours. This ensures the Boilie Prop sits flush against the bait providing a discreet yet totally secure anchor point for the hair loop.,available in colours clear, red, yellow, orange or brown.

Fox Pellet Pegs have been designed to make the presentation of trout and halibut pellet hook baits both practical and effective.

The profile of the Pellet Peg has been shaped to ensure it provides a secure anchor point even when the pellet has begun to soften in water. This stops the hair from pulling through on the cast and during fishing. It also prevents the attentions of small fish ‘pecking’ at the bait and working the hair stop out of the loop.

The peg will tightly fit the inside of the pellet once the bait has been drilled out using our 1.5mm Fine Nut Drill. It will plug the hole and prevent water from soaking into the centre of the pellet; this helps keep the hookbait hard and useable for longer periods of time.

Pellet Pegs are perfectly coloured to match trout and halibut pellets and are shaped to be used either across the ends, or crossways through the centre of pellets.

Available in 11mm,13mm and 21mm sizes.

Versatile and economical hairstops available in clear, red, yellow, orange and brown to match all bait options.

These joined stops are perfect for all kinds of bait, and available in a colour that can be matched to every baiting possibility. As the stops are in strips, the length of stop can be cut to suit the bait. Small baits may only require a single stop whereas large or particularly soft baits can be retained on the hair loop with a line of several stops.

The Fox Horizon Marker has been designed specifically for locating underwater features at long range. The super streamlined, fluted body has been CAD engineered for optimum aero dynamics allowing long, smooth casts to be made accurately and to great distance. Once cast, the Horizon Marker incorporates enough buoyancy to reliably rise to the surface, even with line drag caused by strong cross winds, while the three interchangeable coloured flights ensure the float is highly visible in all conditions. Blow moulded from durable high impact plastic, with a perma-fix base swivel, the Horizon Marker is built to perform and built to last.

The Fox Micro Marker has been designed to locate subtle undulations and features in the lakebed at close to medium range, with leads in the 2-3oz bracket. Engineered to be highly sensitive, robust and versatile, the Micro Marker is perfect for finding those tiny areas which are often overlooked by other anglers and that can be perfect places to trap
pressured carp.

The Fox Weed Marker has been purpose designed to cope with the rigours of
feature finding on venues which have large expanses of weed growth. The buoyancy added to the top end of the body helps the float to rise in all but the thickest growth and the interchangeable flights ensure that when the float does come up, it is highly visible in all weather conditions. For really heavy weed growth, the vaned tops can prove
problematic and a more streamlined option is preferable. For this reason the Weed Marker can be fitted with one of three interchangeable ‘weed caps’ - these are designed without flights to allow smooth float ascent in really thick weed. With no angles or edges to hang up in weed, the float rises easily to the surface where the 3 colour options allow it be easily seen in all conditions.

These are constructed from 30" of 45lb camo lead core; these are some of the finest anti tangle rigs available. Featuring the Fox helicopter safety beads and speed links for fast simple attachment of the lead, the top rubber bead will slide cleanly over the loop at the end of the leader ensuring the hook link can pull free should a breakage occur making these totally fish friendly.
Qty 3

These ready-made leaders are produced from 45lb lead core and swivels from the Fox range. They can be used in conjunction with in-line and conventional leads and are designed so the leader lays flat on the lakebed.
Qty 3

Fox Super Heavy Camo Leadcore incorporates a special camouflage weave to help it blend discreetly into the lakebed. To attain ultimate camouflage, the colour combinations have been deliberately chosen to take into account how the fibre colours darken when wet. Other leadcores are perfectly coloured to begin with and when actually submerged, darken to the point where they simply become a solid dark line - not camouflaged at all!
Even when completely wet, Fox camo leadcore retains an obvious fleck, breaking up its outline and helping to blend in with the surroundings.

The extra heavy core is denser than other versions and ensures the end tackle is kept pinned down hard on the lakebed. This prevents carp from coming into contact with the mainline when visiting the swim or feeding on the baited area.

Incorporating a hi-tensile woven outer sheath which is designed to withstand snags, heavy weed, pads and other abrasive underwater obstacles, leadcore is also very effective as an anti tangle medium and suitable for use with all modern carp rigs. Perfect for subtle, unobtrusive presentations when fishing for line shy and wary carp.

This special bulk 25m spool is ideal for anglers who like to use long leadcore leaders either when boating out baits, or for fishing mega slack line set ups at close range.

Also available a leadcore dispenser suitable for 45lb x 5m of leadcore.

This new Camo Lead Core has been developed following extensive underwater testing. The result is almost exact colouration to ensure the Lead Core matches the lake’s bed!

This is thanks to a unique manufacturing process that enables different colourations over a short length of lead core, making it virtually invisible underwater. Try it for yourself – you’ll be amazed!

There are two colours available for varying lake beds – a Brown for dark lake beds and Green for weedier bottoms. Both are available in 45lb on either 10 metre or 25 metre spools.

Fox Baitbands have been injection moulded using a material with unique properties of stretch and recovery. This means that the band can be stretched to fit a bait many times greater than its size, but also recovers in diameter well enough to be used again and again.

Each band is designed to be unobtrusive and to fit securely around the profile of the chosen bait. Incorporating a special recess for the hookpoint, the Baitband can be simply threaded straight onto the hookshank for the ultimate in convenience. Moulded in a subtle mid brown colour to match most pellets and mixers, Baitbands can also be threaded through rig rings to create advanced anti-eject carp rigs.

High quality diamond shaped stops. Ideal for backstops, float stops or as buffers for sliding rings on hooks.

The Fox Knot-Lok rig glue pen is an invaluable addition to the anglers’ tackle box. The unique design is ergonomic, practical and allows the dispensation of tiny measured amounts of rig glue accurately and without mess.

The glue is clear and waterproof, sets quickly, and is extremely strong. Suitable for a wide range of applications such as gluing knots for added security, hooklink stiffening, bonding baits such as hard pellets to hook shanks and on the bank repair jobs.

Carp Safety Sleeves are a dual purpose injection moulded rubber sleeve designed to provide an extremely safe and highly effective alternative bolt rig assembly.
In the event of the lead becoming snagged not only will it pull free under light pressure, but the large internal bore of the Run Ring allows it to safely run over leadcore or leader knots, freeing the fish in the event of the tackle being lost.

Produced in subtle camo green and supplied with Run Rings, Flexi Ring Swivels and Speed Links, Carp Safety Sleeves provide a practical, safe and effective means of lead attachment.

Fox swivels are manufactured with a dark, matt coating which makes them ideal for use in clear, shallow water when targeting wary carp. Each swivel is produced to the highest standard, featuring barrels that rotate smoothly under tension and perfectly formed eyes.

Size 7 swivels are designed to fit Fox rig components such as Carp Safety Lead Clips, Carp Safety Sleeves, Flexi Beads and our range of In-Line leads. The smaller size 10 and 11 swivels are ideal for use on presentations which require slightly more finesse such as light lead rigs and floater fishing set ups

The components of the Slik Ring & Bead kit have been designed to create hi-performance marker float set-ups which help the float to rise easily to the surface even in weedy or very windy conditions.

The components of the Slik Ring & Bead kit have been designed to create hi-performance Marker Float set-ups. The Slik Ring has a low friction ceramic centre made from diamond polished Zirconia – this allows floats to rise to the surface with the absolute minimum of resistance and will not become damaged or grooved by braided mainlines commonly used in marker float set-ups. The ring is stopped by a purpose designed hi-diameter rubber bead and the kit is supplied with a pair of Speed Links for quick change attachment of lead and float.

The original Helicopter Bead has been re-designed to be compatible with the new range of Fox swivel leads. Injection moulded in camo olive green, the low profile stem grips the lead loop and is long enough to accommodate both swivel and a Speed Link if used. The top bead provides a perfect shock absorber for the rig swivel and in conjunction with a dual bore Flexi Bead creates a tangle free rotary assembly.

The Heli-Bead is designed to be used with 1.70mm Camo Rig Tube or 45lb Camo Leadcore.

Knot Protector Beads act as a buffer which prevents leads and other items from damaging connecting knots in the mainline. Injection moulded in a shock absorbent material and finished in a matt camo green to blend in with most surroundings. Having a multitude of other uses including making very good helicopter beads, Knot Protector Beads are an invaluable tackle box item.

Sliding Ring & Rig Stops are designed to create the ultimate in modern anti-eject carp rigs. Featuring injection moulded stops with a unique shape which act as a buffer for the rig ring without being overly bulky on the hook shank. This leads to improved penetration and more hook-ups.

Each Pear Ring is shaped to optimise movement on the hook shank whilst keeping overall size to a minimum. The rings are moulded to remove any edges and coated to provide slick, friction

Teardrop shaped rubber stops purposely designed for making anti-eject rigs. Featuring a moulded hole throughout to aid fitting over the hook point, these stops grip the hook or can be glued in place for additional security. Packed with matching stainless rings these are essential for use in constructing modern carp rigs.

Available in small, medium and large.

These beads will minimise knot damage due to their unique shock absorbent qualities. Colour Green.
Qty 30 .

Free flow run rings for running legers set-ups. The large internal diameter of the ring reduces line friction and prevents the fish from feeling undue resistance. The result? More confident takes! Supplied with oval beads to prevent damage to the swivel knot and to minimise tangles. Camo green.

Kwik Change Heli Swivels are designed for using PVA sticks or bags mounted on either leadcore or rig tube helicopter rigs.

Available in 2 sizes 7 and 10.

Links for attaching leads, feeders to swivels. Streamlined shape to minimise tangles specially designed not to open out accidentally. Sizes 1 or 2.
Qty 10

Quality rolling swivels fitted with Safe-Lok Links. Sizes 1 or 2.
Qty 10

These stainless steel quick release clips have been designed to allow a fast and simple way of attaching leads to running rings and helicopter rigs.
Qty 20

Available in either round, or oval shape. These rig rings can be used with many different rigs, including the many variants on the 'D' rig style presentations. Sizes Round 1.5mm, 2mm, 2.5mm, 3mm or 4mm. Oval 4.5mm or 6mm.
Qty 25

As carp fishing continues to grow in popularity, actually catching carp has become more difficult. One of the most effective ways of catching the carp off guard and achieving an advantage over other anglers is with careful line concealment.

Down Rigger backleads are designed to keep the mainline pinned down, close to the lakebed where it cannot be seen or picked up by the carp. The weight attaches to the line by a clip and slides down to rest on the lakebed. In the event of it becoming trapped in weed or snags, it will pull free, putting the angler back in direct contact with the fish.

Featuring an ergonomically designed moulded clip that allows fast and easy single handed attachment. This removes the problems associated with trying to hold the rod, line and backlead all at once. The clip itself is moulded from a highly friction free material which has unique properties allowing it to slide easily down either braided or mono mainlines. This helps both with positioning the backlead and when playing a hooked fish. Backleads are also useful when fishing multiple rod set ups, as they help to prevent other lines being picked up when playing lively fish.

HI-SG Tungsten putty is formulated to achieve the highest possible Specific Gravity. This extra high density means that only small amounts need to be used when counterbalancing baits and fine tuning rigs, resulting in neat and streamlined set-ups.

HI-SG grips all lines and hooklink materials, is easily malleable in all weather conditions and hard enough to withstand power casting. The neat tub contains both dull camo green and gravel brown which will blend into just about any kind of lakebed. For the ultimate in concealment, the two colours can be blended together to create a unique camouflage effect.

Perfect for pinning down hooklink materials, counter balancing pop-ups and weighting floats. HI-SG is also excellent when moulded around a swivel to give extra casting weight when freelining or stalking.

Kwik Change Weights provide the angler with a multitude of balancing and weighting options. Available in four popular, practical sizes to cover a variety of uses, the weights attach securely onto the hooklink and unlike putty or shot will not move or become displaced during the playing of fish, or hard casting.

Supplied in a neat, spill proof dispenser with 2m of rubber tube wound onto the outside, the weights are attached simply by stretching a piece of the rubber tube and placing into the slot. This forms a totally secure fixture that will not damage the line. Once located the weight can be moved by moistening the line and gently sliding. To remove the weight simply insert a lip close baiting needle into the tube and pull free.

Kwik Change Weights are low profile, streamlined and will blend in with just about any lake bed. Perfect for balancing pop-ups, pinning down the last few feet of mainline as an alternative to leadcore and for keeping hook links tight to the bottom out of the carp’s way.

The Tigernut Drill features a unique point shape which has been specifically chosen to make the drilling of hard baits such as tiger nuts, quick and easy. The cork plugs are exactly the same diameter as the drill shaft enabling the drilled hole to be filled with a perfectly fitting cork insert. Using this system allows baits such as tigernuts and brazils to be made buoyant or semi buoyant whilst keeping the cork invisible inside the hook bait.

This ultra fine floss is extremely supple and is ideal for creating hairs. It is also ideal for tying baits onto anti-eject rigs. 50m Dispenser

Rubber sleeves, that creates a neat finish when used to sleeve off lead links and helicopter rigs etc. Available in Sizes Small, Medium or Large.

This shrink tube has been developed specially for Fox. It has a 3:1 ratio compared with the majority on the market which are only 2:1. It is ideal for use on hooks as its large diameter when cold passes easily over big eyes and due to the rate of contraction grips the hook shank tightly. A choice of three sizes and colours, are available Green/Brown, Clear or Black. Sizes 1.5 to 0.5mm, 3mm to 1mm or 4.5mm to 1.5mm

The Magnetic Rig Rack is the perfect storage solution for your ready tied rigs, ideal for long sessions, when fishing runs style waters or in match situations.

Ready prepared rigs can be kept close at hand and even ready baited. When used in conjunction with our Kwik Change Swivels and Sleeves a rig change over is super efficient. This enables you to spend more time with a rig in the water and may just land you that extra fish.

Supplied with two methods of attachment, the rig rack can be attached to the inside of your bivvy or clipped onto the edge of a Fox Bivvy Table and will accommodate 21 rigs and 4 baiting tools.

The High Riser Foam will keep your bait & hook suspended for several seconds aiding your presentation especially in weedy conditions. The foam will then detach itself from the hook leaving your rig in perfect condition and float straight to the surface providing you with a handy marker to bait up to.

Designed especially for anglers who use soaked baits, these Glug Pots feature a plastic basket which can be lifted up and supported allowing easy access to your hookbaits without having to fish around in the dip. Supplied with a leak proof screw down cap complete with a ring seal each tub will comfortably hold around 60 x 16mm boilies.

These Bait Tubs are ideal for storing Pop Ups and Dipped Hook Baits as they are supplied with a screw top lid for safe storage.6 x large.

Swivel retaining strip for 20 rigs

High denisty foam core for hook storage

Ideal for wire traces & carp braid/mono hooklinks

Designed to fit the Fox Mini Cooler & Hookbait Carryall and the Jumbo Session Boilie Bag. The Spare Bait Tubs are ideal for storing Pop Ups and Dipped Hook Baits as they are supplied with a screw top lid for safe storage.